Cokin Camera Filters
THE COKIN FILTER HOLDERS
The COKIN Holders fit onto the camera lens by snapping on the adaptor ring to be screwed onto the lens. Make sure your adaptor ring
corresponds to your lens diameter. There are 4 different Series in the COKIN System.
Basically, the size to be used depends on the outer diameter of your lens : the
larger it is, the larger the holder you must go for.
Click on the series of choice for more information
To Order Cokin "A"
Series Camera Filters Click Here
To Order Cokin "P" Series Camera Filters Click Here
To Order Cokin "Z" Series Camera Filters Click Here
To Order Cokin"X" Series Camera Filters Click Here
To Order Cokin Round Screw In Filters Click Here
| HOW DOES THE COKIN CAMERA FILTER SYSTEM WORK ? | ||
|
The
COKIN CREATIVE SYSTEM consists of 3 main components : An Adaptor Ring + A Filter Holder + 1 or more filters.  |
||
| Screw the adaptor ring onto your lens
|
Slide the
filter-holder on the adaptor ring until it snaps in place |
Slide the filter (up
to 3) into one of the filter-holder slots |
Note : The COKIN CREATIVE
round filters (eg. polarizers) slide/rotate into the nearest slot from the lens.
This
means you can simultaneously use other filters such as neutral density graduated
filters and control the position
of both independently.
03/23/2011
|
Tiffen Camera
Filters | Hoya Camera Filters |
Kenko Camera Filters | Heliopan
Camera Filters |
